The chart above from the Equine Research Center, University of Guelph, Guelph, Ontario Canada says it all. Shavings required to bed a stall using StableComfort™ was 80% less than the control stall. Dust levels present during mucking were reduced by 80% as well. The Equine Research Center also found that using StableComfort™ cut their daily clean out time.

The Clegg Hammer

The Clegg Hammer is an ASTM device used to measure the shock absorbance of different surfaces. In effect it tests “hardness”. The lower the number registered by the Clegg Hammer the better the shock absorbance.